Myson 15-10 Bedienungsanleitung PDF herunterladen (Seite 11)

Model Flow Fan Latent* — BTU/hr Sensible — BTU/hr

# Rate Speed 25ºF 35ºF 45ºF 25ºF 35ºF 45ºF

HC 19-15 3 gpm Boost 6,430 10,638 15,488 5,239 6,263 7,157

Medium 6,080 10,035 14,588 4,774 5,806 6,719

Low 5,466 8,995 13,042 4,333 5,163 5,886

HC 14-10 3 gpm Boost 4,932 8,088 11,706 4,166 5,075 5,882

Medium 4,034 6,588 9,503 3,449 4,132 4,731

Low 3,359 5,485 7,853 2,934 3,608 4,211

HC 9-6 3 gpm Boost 2,662 4,314 6,187 2,169 3,013 3,849

Medium 2,218 3,585 5,132 1,961 2,324 2,638

Low 1,822 2,939 4,204 1,626 1,943 2,218

HC 6-4 3 gpm Boost 1,810 2,921 4,178 1,459 2,026 2.590

Medium 1,409 2,271 3,243 1,275 1,561 1,816

Low 1,147 1,845 2,633 1,047 1,300 1,527

Myson, Inc. • 800-698-9690 • www.MysonInc.com 9

MODEL UNIT WEIGHT

# WEIGHT PACKED

FAN CONVECTOR COMPARISON @ 180°F WATER TEMP

FRICTION LOSS

(HEAD)

UNIT WEIGHT

(LBS)

HC 19-15 Boost/Med/Low 41/33/26 ft 95/77/61 sq ft

HC 14-10 Boost/Med/Low 33/27/23 ft 78/64/53 sq ft

HC 9-6 Boost/Med/Low 22/20/17 ft 51/46/40 sq ft

HC 6-4 Boost/Med/Low 13/11/10 ft 31/26/22 sq ft

MODEL FT WG

# 0.5 GPM 1.25 GPM

HC 19-15 35.5 38.5

HC 14-10 30.0 33.0

HC 9-6 21.0 24.5

HC 6-4 16.5 20.0

MODEL FAN SPEED BASEBOARD C.I. RADIATORS

# (525 BTU/FT) (225 BTU/SQ FT)

LO-LINE HC FAN CONVECTORS — BTU/HR HEAT OUTPUT — ENTERING AIR @ 65°F

MODEL FLOW RATE POWER FAN SPEED AIR DELIVERY

#GPM

WATTS (CFM)

Boost 221

HC 19-15 3.0 60 Medium 179

Low 132

Boost 186

HC 14-10 3.0 60 Medium 138

Low 94

Boost 96

HC 9-6 3.0 40 Medium 69

Low 52

Boost 60

HC 6-4 3.0 25 Medium 42

Low 28

HC 19-15 0.6 3.0

HC 14-10 0.4 2.4

HC 9-6 0.4 2.3

HC 6-4 0.4 2.1

NOTE: Correction factor for 1.0 gpm, multiply by 0.87

ENTERING WATER TEMPERATURE (°F)

7,817 9,654 11,525 13,429 15,357 17,316 19,305 21,324 23,372 25,448

6,381 7,871 9,385 10,924 12,487 14,074 15,683 17,315 18,969 20,645

5,064 6,246 7,447 8,668 9,908 11,166 12,443 13,738 15,049 16,374

6,383 7,886 9,418 10,979 12,569 14,187 15,832 17,504 19,203 20,928

5,237 6,468 7,722 8,999 10,299 11,618 12,954 14,309 15,685 17,080

4,376 5,399 6,440 7,498 8,573 9,664 10,772 11,896 13,036 14,191

4,209 5,198 6,207 7,233 8,279 9,342 10,416 11,506 12,613 13,735

3,836 4,732 5,644 6,572 7,514 8,471 9,442 10,427 11,426 12,438

3,331 4,109 4,900 5,703 6,519 7,346 8,186 9,038 9,902 10,775

2,518 3,110 3,714 4,329 4,956 5,593 6,241 6,899 7,569 8,246

2,133 2,635 3,147 3,668 4,199 4,739 5,288 5,846 6,413 6,985

1,821 2,250 2,688 3,134 3,589 4,052 4,522 5,001 5,487 5,981

**For output at water temperatures below 140°F, optional 107°F low temperature cut-off required.

/16"

Water

Connections

Pipe Entr

Cable Entr

/16"

/8"

/2"

Bottom View

Front View

Side View

110** 120** 130** 140 150 160 170 180 190 200

Heating and Cooling from a Single Convector

Lo-Line

Fan Unit... A highly efficient tangential

fan extends the full width of the heat

exchanger, giving extremely quiet,

trouble-free operation. All units have

aluminum fans, sealed motor bearings,

and permanently lubricated porous

bronze sleeve fan bearings.

Controls... The Lo-Line Heater Cooler has

a three speed fan, best controlled by

a 110V AC heat/cool thermostat with

3-speed sub-base. (By others.)

Heat Exchanger... Fin tube heat exchanger

is a manifold design with copper water

conduits expanded to create firm contact

with the surrounding aluminum fins.

Special air turbulator design maximizes

the rate of heat transfer. All units are

hydraulically tested to 300 psi.

Tamper-Proof Controls Cover... All units

include a tamper-proof controls cover

which conceals all electrical controls

from unauthorized usage.

Construction... The chassis is manufactured

from zinc-coated painted steel.

Water Connections…Supply and return are

" copper to compression isolation valves

in the lower left corner of the unit. An air

vent(s) for bleeding the convector is easily

accessed through the front of the unit with

a screwdriver. No special key is needed.

Warranty…MYSON offers a full ten year

warranty on the heat exchanger and a full

three year warranty on the fan motor.

LO-LINE HC FAN CONVECTOR SPECIFICATIONS - Engineered to be efficient.

NOTE: For

surface mounting

application only.

COOLING MODE: ENTERING WATER/AIR TEMP. DIFF. ºF

*These figures are at 50% relative humidity.

DIMENSIONS

MODEL # A

HC 19-15 45

⁄8"

HC 14-10 35

⁄8"

HC 9-6 25"

HC 6-4 20

⁄4"

ISO 9002

NOTE: For proper sizing, use the rating at Medium or Low speeds.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Myson 15-10 Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Warmwasserbereiter & Kessel Myson 15-10